In the face of all kinds of bubbles after the car film, I believe every car owner has been troubled by them, but how to avoid the appearance of such bubbles? Jinan Tieke Xiaobian gives you a brief introduction of how to avoid bubbles in auto film:

在汽车贴膜之前,车子一定要清洗干净，保持干燥和干净，汽车贴膜的时候，膜是保存好的，外面有一层胶纸，要撕掉才可以汽车膜，这时的膜上是几乎没有沙子的，要的是玻璃上要喷少量清水后才可以进行贴膜工作，贴膜后更要仔细的检查有没有气泡和沙粒，边缘有没有贴的不紧凑的情况，同时要进行烤干，这是为了让玻璃上没有沙子之类的脏东西，同时也防止膜与玻璃之间有小泡，从而影响整体的美观。

Before the film is applied to the car, The car must be cleaned and kept dry and clean. When the film is applied to the car, the film is well preserved. There is a layer of adhesive tape on the outside. The film can be removed only after it is torn off. At this time, there is almost no sand on the film. What we need is a small amount of water sprayed on the glass before the film can be applied. After the film is applied, we need to carefully check whether there are bubbles and sand particles, and whether the edge is not tightly attached In order to make sure that there is no dirt like sand on the glass, and at the same time to prevent bubbles between the film and the glass, so as to affect the overall appearance.

汽车贴膜避免出现起泡的方法：

Methods to avoid blistering of automobile film:

1、要找一家有封闭无尘车间的门店，因为汽车贴膜怕灰尘和沙砾，街头作业很难做到环境清洁。要选择无尘贴膜工作室。

1. To find a store with a closed dust-free workshop, because the car film is afraid of dust and gravel, it is difficult to clean the environment for street work. Choose a dust-free film studio.

如何在汽车贴膜施工的时候避免出现气泡呢？

How to avoid bubbles in the construction of car film?

2、如有可能向店家索要一块边角料，揭开背膜露出胶层，然后在地上磨擦，如出现掉色和划道即是假膜。

2. If possible, ask the shopkeeper for a piece of leftover material, uncover the back film to expose the adhesive layer, and then rub it on the ground. If there is fading and scribing, it is the pseudofilm.

3、车主选膜时，要注意搭配膜与车身颜色和谐，建议车主参照施工店所出示的样车效果图，再做选择。要求店家贴前、后风挡不能开刀，一定要整张贴，否则会降低防爆性，而且影响美观。

3. Car owners should pay attention to the harmony between the matching film and the car body color when selecting the film. It is suggested that car owners make a choice by referring to the sample car renderings shown by the construction shop. It is required that the front and rear windshield of the shop should not be cut, and must be pasted completely, otherwise the explosion-proof performance will be reduced and the appearance will be affected.

4、高质量的汽车贴膜在具有保护隐私作用的同时具有单向透光性，不会影响向外观看的视线。

4. High quality automotive film has the function of privacy protection and one-way light transmission, which will not affect the line of sight.

5、刚贴完汽车贴膜后，在三天之内，车主不要升降车窗或用水清洗车，以免水分未干造成脱落。由于天气及金属材质不同，汽车贴膜装贴后干燥程度会有差异，快则2天，慢则7-15天，在某种气候下，汽车贴膜可能会出现雾状或水珠状点，车主不要担心，是正常现象，它会慢慢消失。

5. Just after pasting the car film, the car owner should not lift the window or wash the car with water within three days to avoid falling off due to wet. Due to the different weather and metal materials, the degree of dryness of the car film will be different after it is installed. It will be 2 days fast and 7-15 days slow. In a certain climate, the car film may appear foggy or droplet like spots. Don't worry about it. It's a normal phenomenon. It will slowly disappear.

汽车贴膜面出现污渍，车主不要用化学溶剂擦拭，用清洁的湿毛巾、纸巾沾水或棉布配合洗洁精清洗。车主不要为了美观，而将一些吸盘或一些粘物吸附在汽车贴膜上，这样容易造成膜脱落。

If there is a stain on the surface of the car film, the owner should not wipe it with chemical solvent, but use a clean wet towel, paper towel or cotton cloth with detergent. Car owners do not want to be beautiful, and some sucker or some sticky substances adsorbed on the car film, so easy to cause the film off.