1、如果是使用干贴法，车主需要清洁车身，慢慢的从一边开始贴，一边用的工具刮平车膜，一边轻轻的揭底纸。如果面积比较小的改色膜，可以把底纸全部撕下后，再贴改色膜，需要注意改色膜上不能有灰，否则会影响贴合。

1. If using the dry sticking method, the car owner first needs to clean the car body, slowly stick it from one side, scrape the car film with professional tools, and gently uncover the backing paper at the same time. If the area of the color changing film is relatively small, you can tear off all the backing paper, and then paste the color changing film. You need to pay attention that there should be no ash on the color changing film, otherwise it will affect the fitting.

2、如果是使用湿贴法，清洁完车身后，将玻璃水均匀的涂抹在车身上，将改色膜揭开后，用抹布按住改色膜的表面，一边贴，一边用抹布压平，一边撕下底纸。全部贴好后，等待改色膜内的水分干透即可，也可以使用吹风机加热。

2. If you use the wet paste method, after cleaning the rear of the car, apply the glass water evenly on the car body, uncover the color changing film, press and hold the surface of the color changing film with a rag, paste it, flatten it with a rag, and tear off the backing paper at the same time. After all pasted, wait for the water in the color changing film to dry out, or use a hair dryer to heat it.

无论是使用干贴法还是湿贴法，都需要注意车膜与车身之间不能有灰尘和杂质，否则不仅会影响车膜的效果，还会影响车膜的使用寿命。

Whether using dry or wet sticking method, it is necessary to pay attention to the absence of dust and impurities between the film and the body, otherwise it will not only affect the effect of the film, but also affect the service life of the film.

新车改色贴膜注意事项：

Precautions for new car color change film:

1、刚贴完车身改色膜，不要急着跑高速

1. Don't rush to the high speed just after pasting the body color changing film

刚刚贴过车身改色，胶水还没有完全粘附，跑高速因为车速问题，气压很大，很容易让车身改色膜移位，移位后无法复原，只能撕掉重贴

Just pasted the body color change, and the glue has not completely adhered. Because of the speed problem, the air pressure is very high when running at high speed, so it is easy to make the body color change film shift. After the shift, it cannot be recovered, so it can only be torn off and pasted again

2、贴车身改色膜七天内不要洗车

2. Don't wash the car within seven days after pasting the color changing film on the car body

原因也是因为胶水没有完全粘合，洗车时用的高压水枪容易把边角洗开，一定要等七天后车身改色与胶水完全粘合，再考虑洗车。

The reason is also that the glue is not completely bonded. The high-pressure water gun used in car washing is easy to wash the corners. We must wait seven days for the body to change color and completely bond with the glue before considering car washing.

3、不要使用工业清洗机或者除胶剂去除表面污渍，要使用专用保养液

3. Do not use industrial cleaning machine or glue remover to remove surface stains, but use special maintenance fluid

我们是不建议在车身改色上贴一些胶黏制品的，我们建议平时使用车身改色膜专用保养液，改色膜保养液目前是使用的马迪克技术，如果有了污染物或者腐蚀物落在上面，保养液可以隔绝开污染物，如果之前没有保养过，那么改色膜保养液也可以清洁掉污渍。

First of all, we don't recommend sticking some adhesive products on the body color change. We recommend using the special maintenance fluid for the body color change film at ordinary times. The color change film maintenance fluid currently uses the maddick technology. If there are pollutants or corrosives falling on it, the maintenance fluid can isolate the pollutants. If it has not been maintained before, the color change film maintenance fluid can also clean the stains.

4、远离空调水和洒水车

4. Keep away from air conditioning water and sprinkler

空调水和洒水车的水，都是含有酸性腐蚀物，改色膜因为有颜色，所以一旦被腐蚀出现一块一块的斑，那就要比隐形车衣出现这种斑明显得多，这是色差的问题。我们无法避免遇到酸雨鸟粪这些东西，但是见到空调和洒水车，可以尝试躲远一些。

Air conditioning water and sprinkler water contain acidic corrosive substances. The color changing film has color, so once it is corroded and there are patches, it will be more obvious than the invisible car clothes. This is the problem of color difference. We can't avoid acid rain and bird droppings, but when we see air conditioners and sprinklers, we can try to hide away.

改色贴膜进行后，短时间用心呵护，例如清理车子一周后，且不能用高压水枪冲着膜与漆面接口处喷涌;不可以应用含有胶黏剂这类的物件黏贴到膜表层，且不可以用刷子、研磨剂或带有研磨剂的海绵清洗膜表层。

After changing the color film, take care of it carefully for a short time, for example, after cleaning the car for a week, and do not spray at the interface between the film and the paint with a high-pressure water gun; It is not allowed to apply objects containing adhesives to the film surface, and it is not allowed to clean the film surface with brushes, abrasives or sponges with abrasives.

温馨提醒:有几种颜色是不可以改的。（列如:电镀色、变色龙色，军绿，警用白蓝相间色、工程车辆的黄色和消防车的红色）

Warm reminder: there are several colors that cannot be changed. (such as: electroplated color, chameleon color, military green, white and blue colors for police, yellow for engineering vehicles and red for fire engines)

以上就是为大家介绍的有关济南汽车贴膜的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.http://www.tiekemoshe.com/

The above is a detailed introduction about Jinan automobile film, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.tiekemoshe.com/