所有车窗贴膜都会随着时间慢慢老化而必须去掉，贴膜老化的两大迹象为变成紫色和出现气泡。贴膜里的非金属染料分解及变色，因而形成紫色贴膜。于起泡，则是把贴膜粘到车窗的胶粘剂失去作用所致。
All window stickers will age over time and must be removed. The two signs of aging are turning purple and bubbles. The non-metallic dyes in the film decompose and change color, thus forming a purple film. As for blistering, it is due to the loss of function of the adhesive that sticks the film to the window.
1、汽车贴膜本身质量的问题。车主在够买汽车车窗贴膜时，由于对汽车膜的了解太少，容易买到劣质膜。劣质的汽车膜采用普通的染色工艺，膜层结合粗糙，就会出现像气泡、波浪纹的现象。
1. The quality problem of automobile film itself. When car owners buy car window film, they are easy to buy inferior film because they know too little about car film. Inferior car film using ordinary dyeing process, film combination is rough, will appear like bubbles, wavy phenomenon.
2、车窗贴膜的工艺问题。市场上产品出现的气泡的现象，有很多都是由于施工不当造成的。如果贴膜时对玻璃表面的清洁不到位，导致有细小沙粒或灰尘附着，随着膜的粘贴强度上升后，沙粒或灰尘周围出现压力，就发生了起泡的现象，而起折或脱胶也有可能引起气泡。
2. The technology of window film. Many of the bubbles in the market are caused by improper construction. If the cleaning of the glass surface is not in place when the film is applied, there will be fine sand or dust adhering to it. With the increase of the adhesion strength of the film, there will be pressure around the sand or dust, and blistering will occur, and folding or degumming may also cause bubbles.
3、车窗玻璃加热丝。很多车玻璃上有加热丝，在冬天可以除霜，但这些热量会影响到车膜，在不断的冷热交替中，车膜粘性就会变差，从而出现气泡。
3. Window heating wire. There are heating wires on many car glasses, which can defrost in winter, but the heat will affect the car film. In the continuous alternation of cold and hot, the viscosity of the car film will become worse, resulting in bubbles.
要避免这些问题很简单，膜肯定要贴，而且我们要去汽车贴膜店里去施工，并且选择的汽车贴膜产品，贴膜之后三天之内不要洗车，升降车窗也不要开。
To avoid these problems is very simple, film must be pasted, and we have to go to the auto film shop to build, and choose brand auto film products, after three days don't wash the car, lift window also don't open.
联系我们
施工视频
施工案例
新品·促销区
首页
产品
电话
置顶